Metal Diaphragm RO Booster Pump

There is a difference between a booster pump and a self-priming water pump

As a general rule, ro purifiers can boost pressure to 0.05Mpa at the start, and both kinds of these purifiers can do so.

The Metal Diaphragm RO Booster Pump is designed to be used when the water level of the middle of the pipe is higher than the pump, especially when there is a high water pressure. With the reverse osmosis boost pump, the water pressure on the tap can be increased by 0.3-0.5 MPa, which means that the tap water can now be passed through reverse osmosis RO membrane in order to achieve filtration.

Water pumps that self-prime are used in situations where the water level in the middle of the pipe is lower than the level in the pump itself, such as in well environments, underground water environments, and self-built housings.

As a general rule, the boost pump works on the same principle as the naturally aspirated engine in an automobile, and the self-priming water pump works on the same principle as the turbo engine.